| Details | |
|---|---|
| Work Holding and Operation | COLLET CHUCK 42/60mm – HYDRAULIC |
| Maximum Chucking Size | Ø42mm X 580mm LONG |
| Maximum Machining Length | 80mm Max |
| Maximum Size of Polygon | A/F 85mm/ 110mm |
| Spindle Speed Ratio | 1:2 Std Mechanical |
| Work Spindle Nose Type and Size | DIN A2-5 & A2-6 |
| Main Spindle Motor | TEFC 2.2 kw 1440 rpm |
| Main Spindle Drive | Mitsubishi Variable Freq Drive |
| Z Axis Stroke - Drive | 100mm - Servomotor |
| X Axis Stroke - Drive | 140mm - Servomotor |
| Pos Accuracy and Repeatability | 10 Microns |
| Feed Rate | 0.01 ~ 0.5mm Per Rev |
| Rapid Travel Rate | 10 mtrs Per Min |
| Centralized Lubrication | 0.09 kw |
| Coolant Pump | 0.10 kw |
| Control Voltage | 220 vac/24 vdc |
| Main Power Supply | 3 Phase, 415vac ±10% 50hz |
| Total Connected Load | 5.15 kw (7hp) |
| Floor Area LXWXH | 1.8m X 1.6m X 1.7m |
| Nett Weight | 1600 kgs |
| Gross Weight | 1850 kgs |
